Content GENERAL INFORMATION Technical Data Personal Safety Electrical Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly OPERATING INSTRUCTIONS Console display Button functions Fitness programmes 3.3.1 Quick Start 3.3.2 Manual programme 3.3.3 Low speed programme 3.3.4 Pre-set programmes 3.3.5 User-defi ned programmes 3.3.6 Heart rate-oriented programmes 3.3.7 Training programme Body fat test...
Page 4
RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Parts List (Optional Hand Rails) Exploded Drawing Exploded Drawing (Optional Hand Rails) WARRANTY CONTACT T10.5 Pro...
Page 6
(person with legal responsibility). Class H (home use): use at home. These stationary training devices are intended for the use in private homes where access to the training device is regulated by the owner (person with legal responsibility). T10.5 Pro...
Page 7
Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions. The following safety instructions may appear in this manual: ATTENTION This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.
174 kg Packaging dimensions (L x W x H): 226 cm x 105 cm x 51,5/41 cm Set-up dimensions (L x W x H): 230 cm x 91 cm x 163 cm Maximum user weight: 200 kg Use class: T10.5 Pro...
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly aff ected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year.
Do not install any additional apps. NOTICE The pre-installed apps on TFT consoles are produced and provided by external manufacturers. Fitshop does not take any responsibility for the availability, functionality or contents of these apps. T10.5 Pro...
Set-Up Place ⚠ WARNING Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Make sure that there is a safety area behind the treadmill with a length of at least 2 m and a width at least equal to the width of the treadmill. The training room should be well ventilated during training and not be exposed to any draughts.
To prevent damage to the equipment and the fl oor, assemble the equipment on a mat or packaging board. NOTICE In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled. Ideally, assemble the equipment at its later set-up place. T10.5 Pro...
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. ⚠...
Connect the two cables (121 and 122) with one another. ATTENTION Be careful not to pinch the cables in the following step. Fix the two handlebar posts (2 and 3) to the main frame (1) with six allen bolts (10). step 1 T10.5 Pro...
Page 15
Step 2: Assembly of the handlebar Slide the two covers (105L and 105L) downwards (fi g. 2-1). Connect the two cables (120 and 121) with one another (fi g. 2-2). ATTENTION Be careful not to pinch the cables in the following step. Fix the handlebar (4) to the two handlebar posts (2 and 3) with four allen screws (91).
Page 16
(143) and two fl at washers (27). Slide the covers (105L and 105R) upwards again and fi x them to the handlebar (4) with six cross bolts (11) and four washers (27). 118 98 120 93 105R 105L step 3 T10.5 Pro...
Page 17
Step 4: Finish the assembly Fix the covers (8L and 8R) to the main frame (1) and to the handlebar posts (2 and 3) with six bolts (23) (fi g. 4-1 and 4-2). Fix the pedaling plate welding set (19) to the main frame (1) with two allen bolts (18) and two fl at washers (27) (fi g.
Page 18
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed that the equipment will be supplied with suffi cient power. Technical errors can result. Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical safety. T10.5 Pro...
Page 19
Step 7: Using the holder for mobile devices Place your mobile device onto the holder (C) above the console (84). Pull out the fi xing hook (A) that is located on the back of the console cover and fi x it at the top of your device.
To enable the safety key to detach from the contact point of the cockpit in the event of a fall, the safety key clip must be fi rmly attached to your clothing! Make sure that the safety key is not accessible to children. T10.5 Pro...
Console display INCLINE Indicates the current incline level between 1 - 15 %. DISTANCE Indicates the covered distance between 0.0 - 9999 km. TIME Indicates the already elapsed or remaining training time between 00:00 – 99:59 minutes. PULSE Indicates your current heart rate between 40 - 220 bpm. CALORIES Indicates the burnt calories between 0 –...
With this button you can start the cool down phase at any time. Speed and incline will be reduced until the treadmill has come to a stop and has returned to its original position. ENTER With this button you confi rm your entries. T10.5 Pro...
LED MODE With this button you enter the LED settings. Running Mode: In this mode, the LED lights glow in diff erent colours depending on the speed level: 0-6 KPH - Yellow, 6.1-12 KPH - Green, >12 KPH - Red Neutral Mode: In this mode, the LED lights glow in a neutral white colour.
4.1. Press the STOP button again to end your training. Press the STOP button one more time to return to the main menu. 4.2. Press the START button to continue with your training. → Upon completion of the programme the console will start the cool down phase automatically. T10.5 Pro...
3.3.4 Pre-set programmes When you are in the main menu, use the SPEED- or INCLINE buttons or the switches on the handrails to select the pre-set programmes (PROGRAM). Confi rm with the ENTER button. Use the SPEED- or INCLINE buttons or the switches on the handrails to set your desired training time, distance or calories.
3.3.5 User-defi ned programmes When you are in the main menu, use the SPEED- or INCLINE buttons or the switches on the handrails to select the user-defi ned programmes (USER). Confi rm with the ENTER button. Use the SPEED- or INCLINE buttons or the switches on the handrails to choose one of the four user profi les (U1-U4).
6.1. Press the STOP button again to end your training. Press the STOP button one more time to return to the main menu. 6.2. Press the START button to continue with your training. → Upon completion of the programme the console will start the cool down phase automatically. T10.5 Pro...
3.3.7 Training programme In this programme you are able to set a specifi c distance that must be covered in a fi xed time. When you are in the main menu, use the SPEED- or INCLINE buttons or the switches on the handrails to select the training programme (TRAINING).
To do this, please follow the instructions given in the app. The console will be switched off as soon as the treadmill is connected with the app. When the connection is cut, the console will turn on again. T10.5 Pro...
Page 31
IMPORTANT NOTE The pre-installed apps are produced and provided by external manufacturers. Changes and availability within these apps might occur. Fitshop does not take any responsibility and can not be held liable for the availability, functionality or contents of these apps. To make sure the pre- installed apps are working correctly, they must be updated regularly.
The equipment must not be used until it has been repaired. If necessary, use only original spare parts. ATTENTION In addition to the instructions and recommendations for maintenance and care given here, additional service and/or repair work may be necessary; this must only be carried out by authorised service technicians. T10.5 Pro...
Faults and Fault Diagnosis The equipment undergoes regular quality controls during production. Nevertheless, faults or malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an exchange is usually suffi cient. Please refer to the following overview for the most common errors and how to correct them.
Then observe the mat for about 30 seconds, as the change is not immediately visible. Repeat this procedure until the running mat is straight again. If the running mat cannot be adjusted, please contact your contract partner. T10.5 Pro...
5.4.2 Re-tensioning the Running Mat If the running mat slips over the rollers during operation (if this is the case, there is a noticeable jerk during running), the running mat must be re tightened. In most cases, the slipping is caused by stretching of the mat through use. This is perfectly normal. ...
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment. T10.5 Pro...
Page 37
RECOMMENDED ACCESSORIES To make your training experience even more effi cient and pleasant, we recommend that you add suiting accessories to your fi tness equipment. For treadmills this could for example be a fl oor mat, which makes your fi tness equipment stand more securely and also protects the fl oor from sweat or silicone spray to keep moving parts in good shape and lubricate the running mat.
Page 38
Enter the serial number in the appropriate fi eld. Model no./Modell Nr.: Standard/Norm: Maximum weight/max. Benutzergewicht: Class/Klasse: Date/Datum: Sport-Tiedje GmbH, Flensburger Str. 55, 24837 Schleswig MADE IN Serial nº.: Serial number: Brand / Category: Taurus / treadmill Model Name: T10.5 Pro Article Number: TF-T10.5-2 T10.5 Pro...
Page 39
Parts List Name Supplier Parts No. Specifi cation Qty. Main frame 264C1-3-1000-B99 Left handlebar post 264C1-3-1300-B92 Right handlebar post 264C1-3-1400-B92 Handlebar set 264C1-3-1500-B93 Front handlebar set 264A1-3-1550-B90 Stabilizer 264C1-3-1600-B92 Computer supporting tube 264A1-3-2000-B91 Lower cover for handlebar 264C1-6-1371-B0 452.5*296.2*75.7 post(left) Lower cover for handlebar 264C1-6-1471-B0 452.5*296.2*75.7...
Page 46
Exploded Drawing (Optional Hand Rails) T10.5 Pro...
Page 47
WARRANTY Products from TAURUS® are subject to strict quality control. However, if a fi tness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
Page 48
For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy. T10.5 Pro...
Page 49
CONTACT TECHNIK TEKNIK OG SERVICE CUSTOMER SUPPORT +49 4621 4210-900 80 90 16 50 00800 2020 2772 +494621 4210 944 +49 4621 4210-945 +49 4621 4210-698 info@fi tshop.dk info@fi tshop.co.uk technik@fi tshop.de ...
Page 50
Visit us also on our social media platforms or our blog! T10.5 Pro...
Need help?
Do you have a question about the T10.5 Pro and is the answer not in the manual?
Questions and answers