Advertisement
Quick Links
Instruction Manual
Website:
www.perlesmith.com
TV Wall Mount
Model:PSMFK13
Thank you for choosing this Perlesmith product! At Perlesmith
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others at www.perlesmith.com/pages/reviews if
you are satisfied. Should you have any issues, please don't
hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)
V1.0
Advertisement
Related Manuals for Perlesmith PSMFK13
Summary of Contents for Perlesmith PSMFK13
- Page 1 Instruction Manual V1.0 Model:PSMFK13 Thank you for choosing this Perlesmith product! At Perlesmith we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied.
- Page 2 If your TV VESA is greater than 400x400 mm/16x16 in. or less than VESA 75x75mm/3x3in., this mount is NOT compatible. If this mount is NOT compatible, please contact customer service at supportus@perlesmith.com to find a compatible mount. Verify Your Wall Construction If you are are not sure the...
-
Page 3: Supplied Parts And Hardware
Product Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1 Arm Assembly/Wall Plate 3/8 in.(10mm) - Page 4 Supplied Parts and Hardware for Step 2 Spacers [if needed] Washer Note: The spacers are shown in accordance with the actual size L2.5mm L10mm L20mm [B] x4 [C1] [C2] x4 [C3] x4 Bolts [Only one bolt size fits your TV] Note: The bolts are shown in accordance with the actual size M6 x 15mm M6 x 35mm...
- Page 5 CAUTION! These anchors are for Wall concrete or brick walls Anchor ONLY. DO NOT use them in drywall or wood studs. Step 1 Secure the TV Plate to TV Bracket Assembly Loosen the preassembled bolt [S] to detach the TV plate [a] from the arm assembly/wall plate [01], and keep the preassembled bolt [S] for the use in step 5 ②...
- Page 6 -Too short will not hold the TV. -Too long will damage the TV. Too Short Too Long Correct Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@perlesmith.com...
- Page 7 CAUTION: Ensure the TV plate assembly are EQUALLY CENTERED on your TV and securely fastened in place. Option A (For Flat Back TV) D1/E1 Alternate Spacer Setups C1/C2 （If Needed） Option B (For Round Back TV) D2/E2/E3 Alternate Spacer Setups C1/C2/C3...
- Page 8 Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. D1/E1 D2/E2/E3 C1/C2 （If Needed） C1/C2/C3 Alternate Spacer Setups Option D For cable interference or inset holes, use spacers [05] to create extra space between the TV and TV plate assembly C1/C2/C3 D2/E2/E3 Alternate Spacer Setups...
- Page 9 Step 3 Attach the Arm Assembly/Wall Plate [01] to Wall For wood stud installation, follow STEP 3A For concrete installation, follow STEP 3B Step 3A Wood Stud Option WARNING: ●Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1].
- Page 10 3A-3 Shift the Arm Assembly（If Needed） To better position your mount and TV on your wall,the mount can be horizontal shifted side to side by following these steps Lossen the four preassembled bolts using wrench, and keep the four bolts for 3A-3-1 use in the step 3A-3-3 3/8 in.(10mm)
- Page 11 3A-4 Drill 4 pilot holes using a 5/32 in.(4 mm) mm diameter drill bit. Make sure the depth is not less than 2 3/4 in.(70mm) in.(70mm) 2 3/4 ø5/32 in.(4 mm) 3A-5 Install the wall plate using 4 lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate.
- Page 12 3B-1 Position arm assembly/wall plate [01] at your desired height, level the wall arm assembly/wall plate [01] and mark the pilot hole locations. 3B-2 Drill 4 pilot holes using a 3/8 in.(10mm)diameter drill bit. Make sure the depth is not less than 3 in.(75mm). Never drill into the mortar between blocks.
-
Page 13: Step 5 Level Adjustment
Step 4 Secure the TV onto the Arm Assembly/Wall Plate Secure the TV with TV bracket assembly and TV plate onto the arm assembly/wall plate by tightening the bolts [S]using wrench 3/8 in.(10mm) Wrench HEAVY! You may need assistance with this step. Step 5 Level Adjustment 1. -
Page 14: Step 6 Tilt Adjustment
Step 6 Tilt Adjustment Loosen Tighten 1. Loosen the preassembled bolts [T] using wrench. 2. Adjust TV to your desired tilt angle. 3. Tighten the preassembled bolts [T] to secure TV in place 3/8 in.(10mm) Wrench... - Page 15 Thank you again for choosing this Perlesmith product! All of us at Perlesmith do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
- Page 16 Perlesmith offers products in these categories Anti-tip Straps AV Shelves TV Stands Speaker Stands TV Carts Full Motion Mounts Tilt Mounts Corner Mounts Please remember us when you need one.