Advertisement
Quick Links
TV Cart Instruction Manual
Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you
with the best quality products and services in the industry. Should you have any issues, please
don't hesitate to contact us.
Technical Support:
(US/CA) 1-800-556-6806 Mon-Fri 8am - 8pm (CST)
(UK) 44-808-196-3891 Mon-Fri 2pm - 10pm (UTC)
Other Info:
supportus@perlesmith.com
Website:
www.perlesmith.com
Model: PSTVMC03
Rev01(A)
Advertisement
Related Manuals for Perlesmith PSTVMC03
Summary of Contents for Perlesmith PSTVMC03
- Page 1 TV Cart Instruction Manual Rev01(A) Model: PSTVMC03 Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
Do not use damaged or defective parts. lf you not use additional attachments not recommended by the manufacturer. require replacement parts, contact customer service at supportus@perlesmith.com. Do not use outdoors. This product is intended for indoor use only. -
Page 3: Weight Restrictions
Weight Restrictions TV Plate Maximum Weight Capacity: 99 lbs. (45 kg) Shelf Maximum Weight Capacity: 18 lbs. (8 kg) If your products weigh more than the listed maximum weights, this TV cart is not compatible with your system. WARNING DO NOT exceed the maximum weight indicated. This TV cart is intended for use only within the maximum weights indicated. -
Page 4: Supplied Parts And Hardware
SUPPLIED PARTS AND HARDWARE Supplied Parts Tube and Square Tube Pole Connector Caster TV Brackets 05-A 05-B The upper pole can be stretched from the lower pole. Pole Assembly TV Plate Support Plate Glass Shelf Support Shelf Support Connector Glass Shelf Wrench Socket Wrench Hardware for Assembling the TV Cart... - Page 5 “PSUHP" Universal Hardware Kit which provides a large selection of bolts that can meet the demand of older and unique applications. Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@perlesmith.com.
- Page 6 Secure the Knobs [Z-H] to the Brackets [01] Step 1-2 Note: Remove the pre-assembled nuts [S] on the brackets by hand, [Z-H] then secure the knobs [Z-H] to the brackets. Attach the TV Brackets to Your TV Step 1-3 Knob on outside Knob on outside Ensure the ends with round holes on the TV...
- Page 7 Option C (For TV with A “Bump”) C2/D2/E2/E3 B1/B2 F1/F2/F3 Alternate Spacer Setups C1/D1/E1 B1/B2 (If needed) Option D For cable interference or inset holes, use spacers [F1], [F2] and [F3] to create extra space between the TV and TV brackets. C2/D2/E2/E3 B1/B2 F1/F2/F3...
- Page 8 Step 2 Assemble the Base Step 2-1 Slide the tube and pole connector [03] onto the square tubes [02]. Back Front Step 2-2 Secure the base using bolts and washers [Z-A] and the provided Allen key [Z-I]. Attach casters [04] to the square tubes [02] using the provided wrench [11]. [Z-I] [Z-I] Back...
- Page 9 Step 3 Secure Pole Assembly to Base Step 3-1 Adjust the height of the pole assembly. Step 3-1-1 Loosen the knobs then stretch the upper poles from the lower poles. Step 3-1-2 Adjust the upper poles to your desired height. Note：The height of the two upper poles should be the same.
- Page 10 Secure the 2 pole assemblies [05] to the tube and pole connector [03] using Step 3-2 bolts and rings [Z-B], washers with 3 holes [Z-C] and Allen key [Z-J]. 05-A [Z-C] [Z-B] Back [Z-J] 13/64 ” (5mm) Front Large Allen Key...
- Page 11 Step 4 Install the TV Plate to Upper Poles Secure the TV plate [06] to the upper poles using the support plate [07], bolts and washers [Z-D], and nuts [Z-E]. [Z-E] [Z-J] [Z-D] Back Front 13/64 ” (5mm) Wrench Large Allen Key...
- Page 12 Step 5 Secure the TV onto the TV Plate Step 5-1 Slightly loosen the preassembled bolts on the brackets. Step 5-2 Hang the TV with brackets to the TV plate. [Z-J] Step 5-3 Tighten the bolts on the brackets until the bolts touch the TV plate. [Z-J] [Z-J] HEAVY! You may need...
- Page 13 Step 6 Attach the Glass Shelf Support to the Lower Poles Step 6-1 Secure the glass shelf support [08] to the lower poles using shelf support connectors [09] and nuts [Z-F]. Step 6-2 Tighten bolts [Z-G] to secure glass shelf [10] to glass shelf support [08]. Note: Please do not over-tighten the bolts [Z-G] or use electric drill to prevent the glass shelf [10] from breaking.
- Page 14 Adjustment Step 7 Step 7-1 Tilt Adjustment 1. Loosen the tilt knobs [Z-H] on both sides. NOTE: DO NOT OVER-LOOSEN THE KNOBS. [Z-H] [Z-H] 2. Adjust the TV tilt position. 3. Tighten tilt knobs [Z-H] until the TV can stay at the desired tilt angle. Tighten Loosen [Z-H]...
- Page 15 Step 7-2 Height Adjustment Warning: The TV should be removed from the TV plate before adjusting the height of the poles. [Z-J] 1. Take off the latches [05-B] and loosen the knobs [05-A]. 05-B 05-A HEAVY! You may need 13/64 ”...
- Page 16 2. Adjust the two upper poles to your desired height. Please note that the two upper poles should be adjusted at the same time. 3. Insert the latches [05-B] into the holes nearest to the connecting part of upper pole and lower pole, then tighten the knobs [05-A] to fix the two upper poles in place.