Advertisement
Quick Links
Advertisement
Related Manuals for Perlesmith PSLTK2
Summary of Contents for Perlesmith PSLTK2
- Page 1 Instruction Manual V3.0...
- Page 2 •DO NOT INSTALL INTO DRYWALL ALONE. •Please check www.perlesmith.com for more products and company information. WEIGHT CAPACITY 60 kg 132 lbs...
- Page 3 Step 1 Check the VESA Pattern of Your TV The small and medium assembly option is for smaller TVs where the full assembly may stick out on either side. The mount is shipped in the medium assembly option. Max 600mm（23 5/8 in） 100 mm ≈...
- Page 4 Step 3 Attach the TV Brackets to the TV Larger TVs may angle not tilt the full without including the spacers. M8x65mm M8x45mm M6x30mm M8x15mm M6x15mm C1/C2 C1/C2 C1/C2 Step 4 Assemble Wall Plate(optional) 16”Studs Medium VESA:100x100-400x400mm 24”Studs Large VESA:100x100-600x400mm...
- Page 5 Step 5 Attach Wall Plate to Wall Mark Holes Drill Holes 4mm Drill Bit WARNING: ● Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until they are pulled firmly against the wall plate [01 or 01/03]. ●...
- Page 6 Step 6 Adjust the Tilt Tension Screws [S] to Adjust Tilt Angles of TV 8mm Wrench Tighten Loosen Loosen the four tilt tension screws [S] on both brackets, adjust the hook of the bracket to the desired angle, then tighten tilt tension screws with a wrench (not included) and a screwdriver (not included) to fix the tilting angle of the TV.
-
Page 7: Removing The Tv
Secure TV Step 8 Locking Press Pull down and hold both cords [R], press the bottom of the TV into the wall plate assembly [01 or 01/03] until the latches lock the TV in place. Removing the TV HEAVY! You may need assistance with this step. - Page 8 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN) Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)