Technica Engineering 100/1000BASE-T1 MediaConverter hMTD User Manual page 7

This product is intended for use in automobiles or automotive-like
environments. An automotive-like environment includes test setups
or test benches in the office, laboratory and workshop areas. In the
test setups the same environmental conditions apply as in vehicle
electrical systems. Technica Engineering products are not intended
to be used as standard IT equipment. The test systems and
products from Technica Engineering are designed as customer and
application-specific test modules that are only used by specialists
for development and test facilities.
When integrating the modules in a vehicle or test set-up, the user
must ensure appropriate ventilation or air convection.
Technica Engineering products must not be considered as a safety
element out of context when using safety-critical systems and must
be included in the safety assessment when used. The development
class in a safety system must be taken into account with standard
QM referred to ISO26262.
The device can get hot.
Do not cover the device due to fire danger.
Do not place the device near to highly flammable materials due to fire
danger.
Do not use the device above the specified operating temperature.
The operating temperature is the ambient temperature of the
installation space.
This symbol is only valid in the European Union. If you wish to discard
this product, please contact your local authorities or dealer and ask
for the correct method of disposal. Technica Engineering GmbH is
registered as manufacturer of the brand "Technica Engineering" and
the device type "Small devices of Information- and
Telecommunications- technology for exclusive use in non-private
Households". WEEE reg. No. DE 20776859
Please refer to 10 for the EU Declaration of Conformity in
CHAPTER
accordance with Directive 2014/30/EU.
7
100/1000BASE-T1 MediaConverter hMTDUser Manual