Power Mqs Connector (3) - Technica Engineering 100/1000BASE-T1 MediaConverter hMTD User Manual

Pinning:
Figure 2-3: hMTD Connector
This is a shielded connector. The shield in the device is connected to the ground with
10 Ohm and 10 nF.
2.1.3

Power MQS Connector (3)

Name
TE connectivity
6pos MQS .63 header 90deg THR
TE connectivity
MQS BU-GEH 6P
TE connectivity
MQS crimp contact
Table 2-3: Parts of Tyco MQS Connector
Pinning:
Pin Function
1 Reference GND only
2 Link Status Output (3V3, Active High) (LS)
3 Force LinkDown Input (Active Low) (LD)
4 ForceSlave Mode (Active Low) (FS)
5 Power GND
6 VBAT (6 to 30 Volt DC)
Table 2-4: MQS Connector
For more information about PINs 2, 3, and 4 connected to PIN 1, please see
C 3.2.
HAPTER
100/1000BASE-T1 MediaConverter hMTDUser Manual
Pin Function
1 Data Line Plus (Positive)
2 Data Line Minus (Negative)
Table 2-2: hMTD Connector
Picture Part Number
1-1418888-5
1-969508-2
Distributor: mouser.de
928999-1
Distributors:
Mouser.de; Digikey.de
10