Warranty And Safety Information - Technica Engineering 100/1000BASE-T1 MediaConverter hMTD User Manual

temperature and too high supply-voltage by switching the device off. This automatic
switch-off function is independent of any software function.
The root-cause of excessive temperature in the power supply circuit can eventually be
due to a too high environment temperature or due to an internal failure of the device.
In both cases, the automatic switch-off function will switch-off the power supply from
the device to avoid further damage.
The protection against too high supply-voltage protects the device even in case of an
internal failure of the Technica Engineering device.

1.2 Warranty and Safety Information

Before operating the device, read this manual thoroughly and retain
it for your reference.
The latest documentation for the 100/1000BASE-T1 Media Converter
hMTD can be downloaded here:
https://technica-engineering.de/en/produkt/100-1000base-t1-
mediaconverter-hmtd-connector/
Use the device only as described in this manual.
Use only in dry conditions.
Do not insert any foreign object in the slots/openings of the housing.
Do not apply power to a damaged device.
The device may only be used by specialists.
Do not open the device. Otherwise, the warranty will be lost.
100/1000BASE-T1 MediaConverter hMTDUser Manual
6