Adding A Card To Your Garmin Pay Wallet; Managing Your Garmin Pay Cards; Changing Your Garmin Pay Passcode; Heart Rate Features - Garmin APPROACH S62 Owner's Manual

Hide thumbs Also See for APPROACH S62:
Table of Contents

Advertisement

4
If you have added multiple cards to your Garmin Pay wallet,
swipe to change to another card (optional).
5
Within 60 seconds, hold your watch near the payment reader,
with the watch facing the reader.
The watch vibrates and displays a check mark when it is
finished communicating with the reader.
6
If necessary, follow the instructions on the card reader to
complete the transaction.
TIP: After you successfully enter your passcode, you can make
payments without a passcode for 24 hours while you continue to
wear your watch. If you remove the watch from your wrist or
disable heart rate monitoring, you must enter the passcode
again before making a payment.

Adding a Card to Your Garmin Pay Wallet

You can add up to 10 credit or debit cards to your Garmin Pay
wallet.
1
From the Garmin Connect app, select
2
Select Garmin Pay > > Add Card.
3
Follow the on-screen instructions.
After the card is added, you can select the card on your watch
when you make a payment.

Managing Your Garmin Pay Cards

You can temporarily suspend or delete a card.
NOTE: In some countries, participating financial institutions may
restrict the Garmin Pay features.
1
From the Garmin Connect app, select
2
Select Garmin Pay.
3
Select a card.
4
Select an option:
• To temporarily suspend or unsuspend the card, select
Suspend Card.
The card must be active to make purchases using your
Approach S62 device.
• To delete the card, select .

Changing Your Garmin Pay Passcode

You must know your current passcode to change it. If you forget
your passcode, you must reset the Garmin Pay feature for your
Approach S62 device, create a new passcode, and reenter your
card information.
1
From the Approach S62 device page in the Garmin Connect
app, select Garmin Pay > Change Passcode.
2
Follow the on-screen instructions.
The next time you pay using your Approach S62 device, you
must enter the new passcode.

Heart Rate Features

The Approach S62 device has a wrist-based heart rate monitor
and is also compatible with chest heart rate monitors (sold
separately). You can view heart rate data on the heart rate
widget. If both wrist-based heart rate and chest heart rate data
Heart Rate Features
are available when you start an activity, your device uses the
chest heart rate data.

Wrist-based Heart Rate

Wearing the Device

• Wear the device above your wrist bone.
• See
• See
• For more information about accuracy, go to
or
.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try
these tips.
• Clean and dry your arm before putting on the device.
• Avoid wearing sunscreen, lotion, and insect repellent under
• Avoid scratching the heart rate sensor on the back of the
• Wear the device above your wrist bone. The device should
or
.
• Wait until the
• Warm up for 5 to 10 minutes and get a heart rate reading
• Rinse the device with fresh water after each workout.

Viewing the Heart Rate Widget

The heart rate widget displays your current heart rate in beats
per minute (bpm) and a graph of your heart rate. The graph
shows your recent heart rate activity, high and low heart rate,
and color-coded bars to indicate the time spent in each heart
rate zone.
1
2

Setting an Abnormal Heart Rate Alert

You can set the device to alert you when your heart rate
exceeds a certain number of beats per minute (bpm) after a
period of inactivity.
NOTE: The device should be snug but comfortable. For more
accurate heart rate readings, the device should not move
while running or exercising. For pulse oximeter readings, you
should remain motionless.
NOTE: The optical sensor is located on the back of the
device.
Tips for Erratic Heart Rate Data, page 9
information about wrist-based heart rate.
Tips for Erratic Pulse Oximeter Data, page 10
information about the pulse oximeter sensor.
/ataccuracy.
the device.
device.
be snug but comfortable.
icon is solid before starting your activity.
before starting your activity.
NOTE: In cold environments, warm up indoors.
From the watch face, swipe to view the heart rate widget.
Tap the touchscreen to view your average resting heart rate
(RHR) values for the last 7 days.
for more
for more
garmin.com
9

Advertisement

Table of Contents
loading

Table of Contents