Table of Contents
Advertisement
Using the Flashlight Screen
This device may have a flashlight that can be programmed to flash at various intervals. Consult your physician if
you have epilepsy or are sensitive to bright or flashing lights.
NOTE: This feature is only available for fēnix 7S Standard Edition and fēnix 7 Standard Edition models.
Using the flashlight can reduce battery life. You can reduce the brightness to extend the life of the battery.
1 Hold LIGHT.
2 Select
.
3 Press UP or DOWN to change the flashlight mode.
TIP: You can quickly press LIGHT twice to turn on the flashlight at this setting in the future.
Garmin Pay
The Garmin Pay feature allows you to use your watch to pay for purchases in participating locations using credit
or debit cards from a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit cards to your Garmin Pay wallet. Go to
/garminpay/banks
to find participating financial institutions.
1 From the Garmin Connect app, select
2 Select Garmin Pay > Get Started.
3 Follow the on-screen instructions.
Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases, you must set up at least one payment card.
You can use your watch to pay for purchases in a participating location.
1 Hold LIGHT.
2 Select
.
3 Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times, your wallet locks, and you must reset your
passcode in the Garmin Connect app.
Your most recently used payment card appears.
4 If you have added multiple cards to your Garmin Pay wallet, swipe to change to another card (optional).
5 If you have added multiple cards to your Garmin Pay wallet, select DOWN to change to another card
(optional).
6 Within 60 seconds, hold your watch near the payment reader, with the watch facing the reader.
The watch vibrates and displays a check mark when it is finished communicating with the reader.
7 If necessary, follow the instructions on the card reader to complete the transaction.
TIP: After you successfully enter your passcode, you can make payments without a passcode for 24 hours while
you continue to wear your watch. If you remove the watch from your wrist or disable heart rate monitoring, you
must enter the passcode again before making a payment.
Adding a Card to Your Garmin Pay Wallet
You can add up to 10 credit or debit cards to your Garmin Pay wallet.
1 From the Garmin Connect app, select
2 Select Garmin Pay >
3 Follow the on-screen instructions.
After the card is added, you can select the card on your watch when you make a payment.
76
.
.
> Add Card.
WARNING
garmin.com
Appearance
Advertisement
Table of Contents
