Define The Initial Z Axis Height - Geeetech Delta Rostock mini G2 Building Instruction

ShenZhen GETECH CO.,LTD
GEEETECH
If the three axis move in the different directions, please check the connection of the
stepper motor wires.

9.5 Define the initial Z axis height

If the printer can home normally, the three axis move in the same directions, we can
set the height of the Z axis now, but this value may not be the final height.
1. You can use a rule or digital graphics to measure. The height of the Z axis means
the distance between the nozzle and the building platform after homing. So you need
www.geeetech.com Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858