Data Logger
5.2
The meter can save max. 100 point data into the memory circuit
5.2.1 Save data
1) Turn on the meter.
2) Press the "REC Button" (3-4, Fig.1) momentarily, shows "REC" on the display.
3) Press the "Logger Button" ( 3-2, Fig.1) momentarily will save one measuring value to memory,
display will show:
4) To exit the memory data logger (record) function, press the "REC" button for 2 seconds at least.
The display will revert to the current reading, and will not show "REC".
5.2.2 Call Data
1) Turn on the meter. Press the "Hold Button" (3-3, Fig.1) momentarily, LCD shows "HOLD".
Following, press the "REC Button" (3-4, Fig.1) momentarily, display shows:
Uses "▲ Button" (3-2, Fig.1) or "▼ Button" (3-4, Fig.1) to call the data what are already saved into the
memory.
Manual
8