IDVille ID Maker Apex Getting Started Manual page 43

ERROR TEXT DISPLAYED
ON PRINTER
14 WRONG SD CARD
15 HOLOKOTE INVALID 15:0
16 WRONG HOLOKOTE 16:0
17 UPGRADE INVALID
ERROR DESCRIPTION
13:5 The print engine
microcontroller reported an
error. If rebooting the printer
does not x this problem, try
updating the rmware. If that
does not work, there is
probably a hardware fault.
14:0 The internal SD card did not
have a valid signature.
While attempting to validate a
Holokote le, the printer found
that the le was not in the right
format. Either it is not the right
type of le, or the data has
been corrupted.
While attempting to validate a
Holokote le, the printer found
that the le was not licensed
for this printer. It is possible
that the le was intended for a
di erent printer.
17:0 While attempting to validate an
upgrade le, the printer found
that the le was not in the right
format. Either it is not the right
type of le, or the data has
been corrupted.
17:1 As above.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l
43