IDVille ID Maker Apex Getting Started Manual page 41

ERROR TEXT DISPLAYED
ON PRINTER
11 UPGRADE REQUIRED 11:00 The tted dye lm has a data
12 SENSOR ERROR
ERROR DESCRIPTION
10:15 The printer received a print job.
The y adjustment speci ed for
a panel was out of range. This
probably means the print job
le was corrupt.
10:16 The printer received a print job.
An area or hole setting for one
of the panels was missing a
required element. This
probably means the print job
le was corrupt.
10:17 The printer received a print job.
An area or hole setting for one
of the panels had an out-of-
range value. This probably
means the print job le was
corrupt.
format which the printer could
not understand. The printer
software needs to be upgraded
in order to support this type of
dye lm.
12:0 While hand feeding a card, the
rear sensor blocked before the
front one.
12:1 While hand feeding a card, and
having seen the card reach the
front sensor, the rear sensor
blocked before the front
sensor unblocked.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l
41