IDVille ID Maker Apex Getting Started Manual page 36

ERROR TEXT DISPLAYED
ON PRINTER
6 WRONG FILM TYPE
36
ERROR DESCRIPTION
5:7 While moving the dye lm, too
great a time elapsed between
tacho sensor counts. The lm
has probably either run out or
snapped.
5:8 While trying to take up the lm
slack, no tacho pulses were
observed within a reasonable
amount of time.
6:0 The tted dye lm had an
invalid RFID tag. Either the tag
was not programmed correctly
or there is a problem with the
RFID tag reader.
6:1 A dye lm ribbon was detected,
but a valid dye lm RFID tag
could not be found. This printer
is not con gured to permit
tagless lm.
6:2 The tted dye lm does not
have the right region code for
this printer. Try another roll of
lm.
6:3 The tted dye lm does not
have the right dealer code for
this printer. Try another roll of
lm.
6:4 The tted dye lm does not
have the right project code for
this printer. Try another roll of
lm.
ID C rd Printer - User
SOLUTION BY CATEGORY
Check dye lm.
Try a new dye lm.
nu l