IDVille ID Maker Apex Getting Started Manual page 32

ERROR TEXT DISPLAYED
ON PRINTER
32
ERROR DESCRIPTION
4:2 While feeding a card from the
smart encoder to the ipper, it
took too long for the smart
extract sensor to indicate that
the card was free of the encoder.
4:3 While moving a card from the
ipper into the smart encoder, it
took too long for the smart
insert sensor to trigger.
4:4 While moving the card from the
ipper to the standby position,
it took too long for the mid
sensor to block.
4:7 While feeding a card from the
hopper, and having seen the
card reach the rear sensor, it
took too long for the mid
sensor to block.
4:8 While feeding a card from the
hopper, and having seen the
card reach the mid sensor, it
took too long to clear the rear
sensor by rewinding the feed
motor.
4:9 While moving the card forwards
to feed into the ipper, it took
too long for the card's leading
edge to block the front sensor.
4:13 While moving the card from the
front sensor to the standby
position, it took too long for the
front sensor to unblock.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l