IDVille ID Maker Apex Getting Started Manual page 35

ERROR TEXT DISPLAYED
ON PRINTER
5 OUT OF FILM
ERROR DESCRIPTION
5:0 While moving a dye panel edge
from the dye sensor to the
printhead, it took too long for
the tacho wheel to move the
required amount. The lm has
probably either run out or
snapped.
5:1 While advancing to the next
dye panel, it too long for the
next panel boundary to be
detected.
5:2 It took too many attempts for
the printer to nd a particular
panel of dye lm (possibly
because the dye sensor needs
calibration).
5:3 A valid dye lm RFID tag was
found, but no physical ribbon
could be detected while trying
to take up the lm slack.
5:4 A valid dye lm RFID tag was
found, but there were no shots
remaining.
5:5 After printing a card, the printer
was unable to decrement the
number of remaining prints on
the dye lm RFID tag.
5:6 While advancing the dye lm,
the printer detected the end-
of- lm marker.
ID C rd Printer - User
SOLUTION BY CATEGORY
Check dye lm is tted and
not expired. Also check the
Film is not torn.
Check dye lm.
nu l
35