IDVille ID Maker Apex Getting Started Manual page 37

ERROR TEXT DISPLAYED
ON PRINTER
7 REMOVE FILM
8 CAM ERROR
ERROR DESCRIPTION
6:5 The tted dye lm does not
have the right grade code for
this printer. Try another roll of
lm.
7:0 The printer detected lm was
loaded when trying to calibrate
dye LEDs and dye motor.
7:1 The printer detected lm was
loaded when trying to carry out
a soak test.
7:2 The printer detected lm was
loaded when trying to carry out
the cleaning routine.
8:0 While moving the printhead
cam to the closed position, it
took too long to detect the
trailing edge of the cam pulley
ag.
8:1 While initialising the cam, it took
too long to detect the leading
edge of the cam pulley ag.
8:2 While initialising the cam and
having detected the leading
edge of the cam pulley ag, it
took too long to detect the
trailing edge of the ag.
8:3 While moving the printhead
cam to the open position, it
took too long to detect the
leading edge of the cam
pulley ag.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l
37