IDVille ID Maker Apex Getting Started Manual page 38

ERROR TEXT DISPLAYED
ON PRINTER
9 FLIP ERROR
10 INVALID FILE
38
ERROR DESCRIPTION
9:0 While initialising the ipper, it
took too long to detect the
start of the blocked region of
the ange.
9:1 While initialising the ipper
and having detected the start
of the blocked region of the
ange, it took too long to
detect the start of the
unblocked region (the start of
the slot).
9:2 While moving the card
backwards to feed into the
ipper and having seen the
card arrive at the mid sensor,
it took too long for the mid
sensor to unblock.
10:0 The printer received a print job.
The side number speci ed for
one of the sides of the image
data was invalid. This probably
means the print job le was
corrupt.
10:1 The printer received a print job.
The format speci ed for the
image payload was not
supported. If updating the
rmware does not x this, it
may be that the print job le is
corrupt.
10:2 The printer received a print job
containing magnetic track data.
One of the tracks speci ed an
invalid track number.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l