IDVille ID Maker Apex Getting Started Manual page 34

ERROR TEXT DISPLAYED
ON PRINTER
34
ERROR DESCRIPTION
sensor took too long to unblock.
In other cases, this means it took
too long for the rear sensor to
block.
4:19 While trying to eject the card, it
took too long for the leading
edge of the card to block the
front sensor.
4:20 While trying to eject the card
and having seen the leading
edge of the card reach the front
sensor, it took too long for the
front sensor to unblock.
4:21 While moving the card from the
ipper to the standby position,
and having seen the card reach
the mid sensor, it took too long
for the mid sensor to unblock.
4:22 While trying to feed a card from
the hopper, and having seen the
card reach the front sensor, it
took too long for the front
sensor to unblock.
4:23 While moving the card
backwards to feed into the
ipper, it took
4:24 While moving the card from the
mid sensor to the standby
position, it took too long for the
mid sensor to unblock.
ID C rd Printer - User
SOLUTION BY CATEGORY
nu l