Installation Of The Bushing On The Transformer - ABB GOE Series Installation And Commissioning Manual

4.6.4 Installation of the bushing on the transformer

Overview
It is important to install the draw rod correctly, thus the ends of the draw rod parts must make contact at (67).
CAUTION!
Do not disassemble the joints (52), these are correctly assembled and locked with tread-locking
fluid by ABB.
Procedure
1. Connect the upper draw rod (35) to the lower
draw rod (4).
Installation and commissioning guide
2750 515-1 EN, REV. 14, 2020-06-26
39