Hydraulic Tightening Of The Draw-Rod Nut - ABB GOE Series Installation And Commissioning Manual

10. Remove the bolts (6), washers (7) and lifting
tool (1).
11.
Remove the pull-through cord (12).
12. Tighten the draw-rod nut, refer to Hydraulic tightening of the draw-rod nut, page 49, or Manual
tightening of the draw-rod nut, page 53.
End of instruction

4.8 Hydraulic tightening of the draw-rod nut

Overview
10
38
Installation and commissioning guide
2750 515-1 EN, REV. 14, 2020-06-26
Draw rod nut
Hydraulic jack
49