EMS FirePoint 5000 Communications Manual page 16

EMS 5000 FIREPOINT
32 Press the "" button until the screen displays:
33 Press
display:
34 Press the "YES" key and the screen will display:
35 This number distinguishes the panels from one
another and therefore must be unique to each panel.
Now enter the unique nua number between 03 and 31.
Now press the "YES" key. The screen will display:
36 Now press the "" button until the screen display:
37 Press the "YES" key and the screen will display:
38 The routing should be set to "ENABLED", press the
"YES" key to change its status. Once set to "Enabled"
press the "NO" key. The screen will display:
39 Press the "NO" button until the screen displays:
40 Now turn the control keyswitch to the "ON" position
and the screen will display:
Installation and programming of this Slave Node setup should now be
complete.
©2015 EMS Security Group Ltd. All rights reserved.
the "YES" key and the screen
16
| Checksum Data
> Network Router <
| Radio Lan
Yes= Select
| *
NETWORK ROUTER
will
>Setup local NUA
| View network NUA|
Yes= Select
Local NUA : 00
Input Local NUA
Yes= Finish
| *
NETWORK ROUTER
>Setup local NUA
| View network NUA |
Yes= Select
| Network Name
>Control Routing
| Send Test
Yes= Select
Routing: ENABLED
Push Yes to change
Push No to escape
Yes= Select
| Network Name
>Control Routing
| Send Test
Yes= Select
Panel In Access
Date
Status Normal
Date
TSD233 Iss 3 25/06/15 AJM
|
|
Time
*|
<
Time
Time
*|
<
Time
|
<
|
Time
Time
|
<
|
Time
Time
Time