EMS FirePoint 5000 Communications Manual page 14

EMS 5000 FIREPOINT
10 Press the "" button until the screen displays:
11 Press the "YES" key. The screen will now display:
12 Press the "" button until the screen displays:
13 Press the "YES" key. The screen will now display:
14 Press the "0" key, followed by the "YES" key. The
screen will now display:
15 Now press the "NO" key followed by the
"" button and the screen will display:
16 Press the "YES" key and the screen will display:
17 Press the "YES" key. The screen will now display:
18 Press 384 then press the "YES" key. The screen will
now display:
19 Now press the "" button until the screen displays
"Port To Use" and press the "YES" button. The screen
will now display:
20 Now press the "1" key, followed by the "YES" key. The
screen will now display:
©2015 EMS Security Group Ltd. All rights reserved.
14
| Re-online Device |
>Bus Master Setup<
| Bus Remote Setup|
Yes= Select Time
| * Master Setup *|
> Polling Baudrate <
| Auto Re-online
Yes= Select Time
|* Auto Re-online *|
> Port to use <
| ^^^^^^^^^^^^^ |
Yes= Select Time
Master Port = 0
0 = Off, 1 = RS485
2 = PAGER 232> _
Yes= Select Time
|* Auto Re-online *|
> Port to use
| ^^^^^^^^^^^^^ |
Yes= Select Time
| Bus Master Setup |
> Bus Remote Setup<
| Pager232 Redir'
Yes= Select Time
|* Remote Setup
> Reply Baudrate
| Port To Use
Yes= Select Time
Polling Baud
Is 384, enter rate
(Max 768): _
Yes= Select Time
|* Remote Setup
> Reply Baudrate
| Port To Use
Yes= Select Time
Remote Port = 0
0 = Off, 1 = RS485
2 = PAGER 232> _
Yes= Select Time
| Reply Baudrate
> Port To Use
| ^^^^^^^^^^^^^^^ |
Yes= Select Time
TSD233 Iss 3 25/06/15 AJM
|
<
|
* |
<
|
* |
<
|
|
<