Page 1
Instructions for SR-10XX Series& RGBY Controller SR-10XX Series full-color LED controllers features high-reliability and cost-effective, mainly comes in two types constant voltage series and constant current series. There are lots of items for each type, e.g manual manipulation, wireless remote controlling, etc.
Page 2
Max. Load Power:3/4×4.2-12.6(8.4-25.2)W Work Temperature:-20-+50℃ Load Type:1W( or 3W ) LED Type Speed Level:8 Levels Brightness Level:8 Levels Changing mode:13 modes(9 dynamic modes,4 static modes) Remote controlling distance: >20 meters Dimension:L178×W45×H19mm Features: 1. 256 levels of grey scales for RGB/RGBY, full-color changing gently, smooth, subtlely and softly without any flash, 2.
Page 4
Mini remote controller Three keys on main controller Button Function SPEED To speed up/down color changing(1-8 level cycling changing) MODE Modes of color changing(9 dynamic modes,4 static modes) BRIGHT To adjust the brightness(1-8 level cycling changing) Three keys on remote controllers Buttons of standard Buttons of Mini Functions...
Page 5
2. Connection diagram for connecting power repeaters...
Page 6
Remote controlling learning mode VI. To use remote controller for the first time, it must be learned by LED controller. Methods are: hold button SPEED & MODE on LED controller concurrently for 3 seconds, The LED indicator will turn on, then press any key on the controller(hold it for over 2S), the indicator will give out a flash which signifies learning mode is activated now, you can use the controller normally...
Page 7
from then on. Use the same method to apply on other remote controllers, one LED controller can learn ten remote controllers(maximium). VI. malfunctions analysis & troubleshooting Causes Troubleshooting Malfunctions Can not learn the remote 1. learning duration (only within 3S) 1.
Need help?
Do you have a question about the SR-10 Series and is the answer not in the manual?
Questions and answers