Mechanical Safety; Laying Out Cables - Huawei UPS2000-G-3 kVA User Manual

UPS2000-G-3 kVA
User Manual (CTC)

1.4 Mechanical Safety

Moving Sharp Objects
Wear protective gloves when moving sharp objects.
Moving Heavy Objects




Handling Fans
Do not insert fingers or boards into the operating fans until the fans are switched off, and have
stopped running.

1.5 Laying Out Cables

Binding Signal Cables
Signal cables must be bound separately from strong-current cables and high-voltage cables.
Laying Out Cables
When the temperature is low, a violent strike or vibrations may damage the cable sheathing.
To ensure cable safety, comply with the following requirements:



Issue 02 (2019-05-05)
Perform operations in accordance with all instructional symbols on the device.
Take caution to avoid injury when moving heavy objects.
When moving or lifting a device, hold the handle or bottom of the device.
Move the cabinet with caution. Any bumping or falling may damage the device.
Cables can be laid, or installed, only when the temperature is higher than 0° C (32° F).
Handle cables with caution, especially at lower temperatures.
Before laying out cables that have been stored in temperatures lower than 0° C (32° F),
move the cables to an environment that is at the requisite ambient temperature. Store
them in this environment for at least 24 hours.
Do not drop the cables directly from the vehicle.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
7