When using the
®
Bluetooth
tion
Messages cannot be viewed.
Message transfer is not
■
enabled on the cellular
phone.
Enable message transfer on the
cellular phone (approve mes-
sage transfer on the phone).
Automatic transfer func-
■
tion on this system is set to
off.
Set automatic transfer function
on this system to on. (P.207)
New message notifications
are not displayed.
Notification of SMS/MMS/
■
E-mail reception on this
system is set to off.
Set notification of SMS/MMS/
E-mail reception on this system
to on. (P.205)
Automatic message trans-
■
fer function is not enabled
on the cellular phone.
Enable automatic transfer func-
tion on the cellular phone.
message func-
8-3. What to do if...
In other situations
The Bluetooth
status is displayed at the top
of the screen each time the
system is activated
Connection confirmation
■
display on this system is
set to on.
To turn off the display, set con-
nection confirmation display on
this system to off. (P.47)
*
: The engine switch is in ACC or
ON.
Even though all conceivable
measures have been taken,
the symptom status does not
change.
The cellular phone is not
■
close enough to this sys-
tem.
Bring the cellular phone closer
to this system.
Radio interference has
■
occurred.
®
Turn off Wi-Fi
devices that may emit radio
waves.
The cellular phone is the
■
most likely cause of the
symptom.
Turn the cellular phone off,
remove and reinstall the battery
pack, and then restart the cellu-
lar phone.
217
®
connection
*
.
devices or other
8