Toyota 4Runner 2021 Owner's Manual page 44

42
2-2. Connectivity settings
4
Select the desired connec-
tion.
 "Device Info": Select to con-
firm and change the
®
Bluetooth device informa-
tion. (P.44)
When another Bluetooth

device is connected
 To disconnect the Bluetooth
device, select "Yes".
5
Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is dis-
played, follow the guidance
on the screen to try again.
● It may take time if the device con-
nection is carried out during
®
Bluetooth audio playback.
● Depending on the type of
®
Bluetooth device being con-
nected, it may be necessary to
perform additional steps on the
device.
● When disconnecting a Bluetooth
device, it is recommended to dis-
connect using the system.
Connecting a Bluetooth
device in a different way
(from phone top screen)
P.190
Connecting a Bluetooth
device in a different way
(from phone setup screen)
P.204
Connecting a Bluetooth
device in a different way
®
(from Bluetooth
screen)
®
P.145
Auto connection mode
■
To turn auto connection mode
on, set "Bluetooth Power" to on.
(P.45) Leave the Bluetooth
device in a location where the
connection can be established.
 When the engine switch is in
ACC or ON, the system
searches for a nearby regis-
tered device.
 The system will connect with
the registered device that was
last connected, if it is nearby.
When automatic connection
®
priority is set to on and there
is more than one registered
Bluetooth
the system will automatically
connect to the Bluetooth
phone with the highest prior-
®
audio
®
phone available,
®
®
®
®
®