Toyota 4Runner 2021 Owner's Manual page 103

Reordering destinations
When more than 1 destination
has been set, the arrival order of
the destinations can be
changed.
1
Select on the map
screen. (P.72)
2
Select "Reorder".
3
Select the desired destina-
tion and select "Move Up" or
"Move Down" to change the
arrival order. Then select
"OK".
Selecting route type
1
Select on the map
screen. (P.72)
2
Select "Route Type".
3
Select the desired route type.
 The entire route from the
starting point to the destina-
tion is displayed. (P.92)
 During driving, the route guid-
ance starts after selecting the
desired route type.
3-3. Route guidance
Setting route preferences
The conditions to determine the
route can be selected from vari-
ous choices such as freeways,
toll roads, ferries, etc.
1
Select on the map
screen. (P.72)
2
Select "Preference".
3
Select the desired route pref-
erences and select "OK".
● Even if the "Avoid Freeways"
route preference is turned off, the
route may not be able to avoid
freeways in some cases.
● If the calculated route includes a
trip by ferry, the route guidance
shows a sea route. After traveling
by ferry, the current position may
be incorrect. Upon reception of
GPS signals, it is automatically
corrected.
Detour setting
During the route guidance, the
route can be changed to detour
around a section of the route
where a delay is caused by road
repairs, an accident, etc.
1
Select on the map
screen. (P.72)
2
Select "Detour".
101
3