110
3-4. Setup
Position/Direction calibra-
tion
When driving, the current posi-
tion mark will be automatically
corrected by GPS signals. If
GPS reception is poor due to
location, the current position
mark can be adjusted manually.
1
Select "Position/Direction".
2
Scroll the map to the desired
point (P.75) and select
"OK".
3
Select an arrow to adjust the
direction of the current posi-
tion mark and select "OK".
Tire change calibration
The tire change calibration func-
tion will be used when replacing
the tires. This function will adjust
miscalculation caused by the
circumference difference
between the old and new tires.
1
Select "Select after a Tire
Change".
The message appears and
the quick distance calibration
starts automatically.
●
If this procedure is not performed
when the tires are replaced, the
current position mark may be
incorrectly displayed.
Traffic settings
*
: This function is not available in
some countries or areas.
Traffic information such as
traffic congestion or traffic
incident warnings can be
made available.
Displaying the traffic set-
tings screen
1
Press the "MENU" button.
2
Select "Setup".
3
Select "Traffic".
4
Select the desired items to
be set.
*