Toyota 4Runner 2021 Owner's Manual page 211

From USB device
Backed-up contact data
("vCard" formatted) can be
transferred from USB device or
®
Bluetooth
phone to this sys-
tem.
1
Connect a USB device.
(P.124)
2
Select "Transfer Contacts
from Device".
3
Select "From USB".
4
Select "USB 1" or "USB 2"
when the multiple USB
devices are connected. If a
USB device is connected,
skip this procedure.
5
Select "Replace Contacts" or
"Add Contact". If the contact
is already registered, skip
this procedure.
"Replace Contacts": Select to trans-
fer the contact from the connected
USB device or Bluetooth
and replace the current one.
"Add Contact": Select to transfer
the desired contact data from the
connected USB device or
®
Bluetooth phone to add to the cur-
rent one.
6
Select a desired file from
vCard file list.
7
Check that a confirmation
screen is displayed when the
operation is complete.
● Depending on the type of
®
Bluetooth phone used and num-
ber of files, it may take time to dis-
play vCard file lists and download
contacts.
● Downloading may not complete
correctly in the following cases:
• If the engine switch is turned off
during downloading.
• If the USB device or Bluetooth
phone is removed before down-
loading is complete.
New contact data can be regis-
tered.
Up to 4 numbers per person can
be registered. For PBAP com-
patible Bluetooth
function is available when "Auto-
matic Transfer" is set to off.
(P.207)
1
2
3
®
phone
4
5
■
1
2
3
8-2. Setup
Registering a new contact
to the contacts list
®
Select "New Contact".
Enter the name and select
"OK".
Enter the phone number and
select "OK".
Select the phone type for the
phone number.
To add another number to
this contact, select "Yes".
Registering a new contact
in a different way (from the
call history screen)
Display the phone top
screen. (P.188)
Select "History" and select a
contact not yet registered in
the contact list.
Select "Add to Contacts".
209
®
phones, this
8