Toyota 4Runner 2021 Owner's Manual page 193

8-1. Phone operation (Hands-free system for cellular phones)
3
Select the desired device to
be connected.
4
Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is dis-
played, follow the guidance
on the screen to try again.
®
Bluetooth phone condition
■
display
The condition of the Bluetooth
phone appears on the upper
right side of the screen. (P.16)
Using the phone
switch/microphone
Steering switch
■
By pressing the phone switch, a
call can be received or ended
without taking your hands off the
steering wheel.
Volume control switch
A
• Press the "+" side to increase the
volume.
• Press the "-" side to decrease the
volume.
Off hook switch
B
• Press to start talking.
• Press to put a call on hold.
• Depending on the system, if the
switch is pressed when an Apple
CarPlay connection is estab-
lished, the Apple CarPlay phone
application will be displayed on
the system screen.
On hook switch
C
• Press to end talking/dialing.
• Press to refuse to receive the
call.
*
: This function is not available in
some countries or areas.
®
Microphone
■
The microphone is used when
talking on the phone.
● The other party's voice will be
heard from the front speakers.
The audio/visual system will be
muted during phone calls or when
hands-free voice commands are
used.
Talk alternately with the other
●
party on the phone. If both parties
speak at the same time, the other
party may not hear what has been
said. (This is not a malfunction.)
● Keep call volume down. Other-
wise, the other party's voice may
be audible outside the vehicle and
voice echo may increase. When
talking on the phone, speak
clearly towards the microphone.
● The other party may not hear you
clearly when:
191
*
8