Toyota 4Runner 2021 Owner's Manual page 84

82
3-1. Basic operation
Displaying traffic informa-
tion
A list of current traffic informa-
tion can be displayed along with
information on the location of
each incident.
1
Display the traffic incidents
screen. (P.81)
2
Select "Traffic Events on Cur-
rent Road", "Traffic Events on
Current Route" or "Traffic
Events Nearby".
3
Select the desired traffic
information.
When "Traffic Events Nearby"

is selected, depending on
whether the traffic flow infor-
mation is enabled/disabled,
the following will be displayed:
When enabled: Traffic event and
congestion information
When disabled: Traffic event infor-
mation only
4
Check that the traffic informa-
tion is displayed.
"Detail": Select to display detailed
traffic information.
Displaying predictive traf-
fic information
A map with predictive traffic data
can be displayed.
1
Display the traffic incidents
screen. (P.81)
2
Select "Predictive Traffic
Map".
3
Scroll the map to the desired
point (P.75) and set the
time of predictive traffic infor-
mation.
 The time of the predictive traf-
fic information can be
changed in 15-minute inter-
vals up to +45 minutes.
"<": Moves the time forward 15 min-
utes.
">": Moves the time back 15 min-
utes.
My traffic routes
Traffic information along the
saved routes can be displayed.
To use this function, it is neces-
sary to register a route.
(P.111)
1
Display the traffic incidents
screen. (P.81)
2
Select "My Traffic Routes".
 If map data has been
updated, a confirmation
screen will be displayed.
Select "OK" or "Do Not Tell
Me Again".
3
Select the desired route.