Wi-Fi ® Hotspot - Toyota 4Runner 2021 Owner's Manual

48
2-2. Connectivity settings
®
Wi-Fi Hotspot
*
: Vehicles equipped with DCM
This function is not available in
some countries or areas.
By connecting a device to
the vehicle via Wi-Fi
access the internet through
the DCM (Data Communica-
tion Module).
 To use this function, a
®
Wi-Fi hotspot service sub-
scription from AT&T is
required. Connect your
device to the in-vehicle
access point (see instruc-
tions below), or contact the
Customer Experience Cen-
ter at 1-800-331-4331 for
assistance.
Connecting a device to
the in-vehicle access
point
Searching for and con-
necting a device to the
vehicle access point
1
Enable the Wi-Fi
function. (P.49)
2
Disable the "Hide Access
Point" function. (P.49)
3
Search for the vehicle access
point using the device you
wish to connect.
 For details about operating
*
®
, it can
®
hotspot
the device, refer to the docu-
mentation which came with it.
4
Operate the device to con-
nect it to the vehicle access
point.
 To check the vehicle access
point password, check "Pass-
word". (P.49)
● Hints for connecting to the vehicle
®
via Wi-Fi can be displayed.
(P.49)
Connecting a device to the
in-vehicle access point
using the access point
name (SSID)
1
Enable the Wi-Fi
function. (P.49)
2
Enable the "Hide Access
Point" function. (P.49)
3
Enter the access point name
(SSID) into the device you
wish to connect and connect
it.
 To check the vehicle access
point password, check "Pass-
word". (P.49)
 The security settings on the
device must be the same as
that displayed for "Security".
(P.49)
 For details about operating
the device, refer to the docu-
mentation which came with it.
®
hotspot