Toyota 4Runner 2021 Owner's Manual page 204

202
8-1. Phone operation (Hands-free system for cellular phones)
Replying to a message
(quick reply)
15 messages have already
been stored.
1
Display the message screen.
(P.199)
2
Select the desired message
from the list.
3
Select "Reply".
4
Select "Quick Message".
5
Select the desired message.
: Select to edit the message.
(P.202)
6
Select "Send".
"Cancel": Select to cancel sending
the message.
 While the message is being
sent, a sending message
screen is displayed.
7
Check that a confirmation
screen is displayed when the
operation is complete.
 If an error message is dis-
played, follow the guidance
on the screen to try again.
● Depending on the type of
®
Bluetooth phone, reply function
is not available.
Editing quick reply mes-
■
sages
This operation cannot be per-
formed while driving.
1
Select corresponding to
the desired message to edit.
2
Select "OK" when editing is
completed.
To reset the edited quick reply
●
messages, select "Default".
● Quick message 1 ("I am driving
and will arrive in approximately
*
[##] minutes.")
This message cannot be edited
and will automatically fill in [##]
with the navigation calculated esti-
mated time of arrival on the con-
firm message screen.
If there are waypoints set, [##] to
the next waypoint will be shown.
If there is no route currently set in
the navigation system, quick mes-
sage 1 cannot be selected.
● Depending on the type of
®
Bluetooth phone used for receiv-
ing messages, reply function may
not be used.
*
: Premium Audio only
Calling the message
sender
Calls can be made to an
e-mail/SMS/MMS message
sender's phone number.
This operation can be per-
formed while driving.
Calling from e-mail/SMS/
■
MMS message display
1
Display the message screen.
(P.199)
2
Select the desired message.
3
Select , or press the
switch on the steering wheel.
 If there are 2 or more phone
numbers, select the desired
: