Forward Facing Installation With Lap Belt - Baby Trend Cover Me CV89 Owner's Manual

5.0 Installation and Use
10. Ensure the angle indicator bubble is
centered between the lines for children
4-22 lbs. (1.81 - 9.97 kg) to keep the
child's airway open. Ensure the angle
indicator line is level with the ground for
children 23-40 lbs (10.43 - 18.14 kg) to
keep the child's airway open (Fig. 35a).
11. Check for movement of the car seat
at the safety belt path. The car seat
should not move more than 1 inch in
any direction. If the car seat moves
more than 1 inch, repeat all steps until
all safety steps are met (Fig. 351b).
12. Place child in seat and secure harness.
Recheck angle indicator to confirm the
angle with the appropriate indicator
by weight.
13. Repeat steps if necessary, after
securing child.
35
Internal Harness Mode
Level this line with the ground
for children greater
than 22 lbs. (10 kg)
Center bubble for
children4 -22 lbs.
CV0107052419
Fig. 35 a
Fig. 35b
Copyright © 2020, Baby Trend, Inc.
5.0 Installation and Use

5.5 Forward Facing Installation with Lap Belt

See section 2.2 for requirements
• Weight is 23 - 65 lbs (10.43 - 29.48 kg).
• Height is 50 inches (127 cm) or less.
• Age is 1 year old.
Lap Belt with
Top tether
1. Place this car seat in a rear seating
position. Always adjust the base to position
5 or 4 (Fig. 36a) when forward facing.
NEVER use base position 1, 2
forward-facing position.
DO NOT extend flip foot out while in
Forward Facing position.
2. Make sure vehicle is parked on level ground then, place the car seat
in a rear seating position and ensure vehicle is level.
Copyright © 2020, Baby Trend, Inc.
Internal Harness Mode
or 3 in a
Fig.36a
36