Rear Facing Lap Belt Installation - Baby Trend Cover Me CV89 Owner's Manual

5.0 Installation and Use
10. Ensure the angle indicator bubble is
centered between the lines for children
4-22 lbs. (1.81 - 9.97 kg) to keep the
child's airway open. Ensure the angle
indicator line is level with the ground for
children 23-40 lbs (10.43 - 18.14 kg) to
keep the child's airway open (Fig. 27a).
11. Check for movement of the car seat at
the safety belt path. The car seat should
not move more than 1 inch in any
direction. If the car seat moves more
than 1 inch, repeat all steps until all
safety steps are met (Fig. 27b).
12. Place child in seat and secure harness.
Recheck angle indicator to confirm the
angle with the appropriate indicator
by weight.
13. Harness Covers, Head Pillow & Body
insert Usage (Fig. 27c).
• DO NOT use head pillow if child's head
falls forward.
• DO NOT use head pillow above shoulder
position 3.
• ONLY use the body insert with children
who weigh between 4-18 lbs.
• Rear facing use only.
14. Repeat steps if necessary, after securing child.
27
Internal Harness Mode
Level this line with the ground
for children greater
than 22 lbs. (10 kg)
Center bubble for
children4 -22 lbs.
CV0107052419
Fig. 27a
Lap Shoulder
belt
Fig. 27b
Fig. 27c
Copyright © 2020, Baby Trend, Inc.
5.0 Installation and Use

5.3 Rear Facing Lap Belt Installation

See section 2.1 for requirements
• Weight is 4 - 40 lbs (1.81 - 18.14 kg).
• Height 1" from top of seatback.
Lap belt
1. Extend the flip foot into position and
ensure lock is engaged. To adjust
the angle of the seat lift the recline
handle. Use positions 1-3 for Rear
facing (Fig. 28a).
Angling the car seat will keep the
baby's head back and airway open.
2. Make sure vehicle is parked on level ground then, place the car seat
in a rear seating position and ensure vehicle is level.
Copyright © 2020, Baby Trend, Inc.
Internal Harness Mode
3

Fig. 28a
28