To Set The Alarm - Aiwa AM-F80 Operating Instructions Manual

D
2
1
2
1
68
OTHER SETTINGS
To set the alarm → D
1,3
You can set the unit to alert you after a
specified time.
Operate during playback or in
playback pause mode.
1 Press DISP while pressing ENTER.
2 Press r or t to specify the
1
3 Press ENTER to confirm.
3
When the specified time has reached, the
unit enters playback pause mode. "It'sTIME"
is displayed with beep sound for 30 seconds.
Then the playback resumes.
"ALRM SET" is displayed and followed
by "ALM 0:10".
When operating with the remote control,
press DISP/SEARCH and MODE.
duration until the unit alerts you.
The time changes between 10 minutes
and 3 hours in 10-minute steps.
If r or t is kept pressed, the time
will change in 1-minute steps.
The unit starts to count down.
English