Other Settings; To Cancel The Beep Sound (Signal Sound Function); To Limit The Maximum Volume Level (Ear Guard Function) - Aiwa AM-F80 Operating Instructions Manual

A
2
1
1
2
3
B
2
1
1
2
3
64

OTHER SETTINGS

To cancel the beep sound (Signal
3
sound function) → A
Beep sounds are heard when you press an
4
operation button. You can cancel this beep
sound.
Operate in stop mode.
1 Keep DISP pressed for about 3
seconds.
"CLOCKSET" is displayed.
2 Press MODE.
" BEEP ON" is displayed.
3 Press ENTER.
"BEEP OFF" is displayed and beep
sounds are canceled.
4 Press a.
To resume the beep sound
Display "BEEP ON" in step 3.
To limit the maximum volume level
(Ear guard function) → B
You can set the volume level from 0 to 20.
3
When you set the Ear guard function, the
maximum volume will be limited at 12.
4
Operate in stop mode.
1 Keep DISP pressed for about 3
seconds.
"CLOCKSET" is displayed.
2 Press MODE twice.
"EARG OFF" is displayed.
3 Press ENTER.
"EARG ON" is displayed and the Ear
guard function is set.
" Ear GRD! " is displayed when setting
the volume over the level of 12.
4 Press a.
To cancel the Ear guard function
Display "EARG OFF" in step 3.
English