Table of Contents
Advertisement
Figure 41: Socket head cap screw lined up with access hole.
6. Using an 4MM Allen wrench check both screws for tightness. Using an allen key will not provide
enough leverage to fully tighten the connection useless you add more mechanical advantage.
We recommend to use a T-handle or ratchet with a deep 4MM Allen socket driver to achieve
proper torque.
7. DO NOT over tighten, if they are loose, you will feel it. Make sure the 4 mm Allen is fully seated
before tightening, be careful not to strip the socket head screws.
Storage Recommendations
The following is the proper procedure for storage after a session of use:
1. Ensure that the shell plate is clear of any brass
2. Check the need for lubrication after every session and apply it as necessary at the key
lubrication points outlined in the Evolution
potentially dangerous situation and may lead to unreliable results
3. Turn off the power to the console of the autodrive
4. Turn off the power to the case feeder and the bullet feeder
5. Turn off the power to the tablet
42
Mark 7® Reloading EVOLUTION User Manual version 1.1, Copyright 2018 All rights
TM
press Manual. Insufficient lubrication creates a
reserved
Advertisement
Table of Contents
Need help?
Do you have a question about the Evolution and is the answer not in the manual?
Questions and answers