Table of Contents
Advertisement
Waiver Screen & Software and Firmware version
The image above is the first screen displayed after launching the Reloader application. The operator
must accept the terms and conditions on the waiver screen also available on the Mark 7® Reloading
website. If the operator accepts these terms the operator can touch ACCEPT on the screen. If the
operator does not accept these terms they must touch DENY which will immediately close the
application.
The software and firmware version will be displayed at the bottom of the waiver screen as shown
above.
Before each session of use of the machine
Before each loading session, fully inspect the machine – this will reduce the errors you may encounter.
Some of the items to inspect include:
1. All components removed from shellplate
2. Shellplate lined up with indexing guide pins and indexing properly
3. No loose cables, components or accessories around the working areas of the press.
MARK 7® RELOADING EVOLUTION USER MANUAL VERSION 1.1, COPYRIGHT 2018
Figure 13: System Waiver Screen
ALL RIGHTS RESERVED
19
Advertisement
Table of Contents
Need help?
Do you have a question about the Evolution and is the answer not in the manual?
Questions and answers