Mounting The Terminal Block For The Passive Pt100 Resistance Thermometer (Without Hut Temperature Head Transmitter); Cable Marking - Pepperl+Fuchs LGC2 Manual

Level Probe LGC2
Installation
5.8 Mounting the Terminal Block for the passive Pt100 Resistance
Thermometer (without HUT Temperature Head Transmitter)
If the device with optional Pt100 resistance thermometer is supplied without the optional HUT
temperature head transmitter, a terminal block is provided with the terminal box for the purpose
of wiring the Pt100 resistance thermometer.
Warning!
Explosion hazard when using the resistance thermometer
The usage of resistance thermometer in the hazardous area can result in explosion.
Do not use the resistance thermometer and the terminal block in the hazardous area.
Figure 5.7
5.9

Cable Marking

Figure 5.8
26