Receiving Faxes On The Printer - Epson ET-M3180 Series User Manual

User's Guide
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap ADF Continuous Scan to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
x
5. Tap (Send).
6. When scanning the first set of originals is complete and a message is displayed on the control panel asking you
to scan the next set of originals, select Yes, set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and
starts sending the document.
Related Information
"Placing Originals" on page 60
&
"Sending Faxes Automatically Using the Control Panel" on page 137
&
"Fax Settings" on page 146
&

Receiving Faxes on the Printer

If the printer is connected to the phone line and basic settings have been completed using the Fax Setting Wizard,
you can receive faxes.
There are two ways of receiving faxes.
❏ Receiving an incoming fax
❏ Receiving a fax by making a call (Polling Receive)
Received faxes are printed in the printer's initial settings.
You can save received faxes and check them on the printer screen.
To check the status of the fax settings, you can print a Fax Settings List by selecting Fax >
> Fax Settings List.
See "Related Information" below to make settings.
Related Information
"Making Settings Individually for Printer's Fax Features" on page 82
&
Faxing
141
(More) > Fax Report