Printing Or Copying Slows Down Dramatically During Continuous Operation; Cannot Cancel Printing From A Computer Running Mac Os X V10.6.8; Cannot Start Scanning - Epson ET-M3180 Series User Manual

User's Guide
❏ Disable quiet mode. This feature slows down the printing speed.
❏ Control Panel
Select on the home screen, and then disable Quiet Mode.
❏ Windows
Select Off as the Quiet Mode setting on the printer driver's Main tab.
❏ Mac OS
Select System Preferences from the
then select the printer. Click Options & Supplies > Options (or Driver). Select Off as the Quiet Mode
setting.
Printing or Copying Slows Down Dramatically During Continuous
Operation
Printing or Copying slows down to prevent the printer mechanism from overheating and being damaged.
However, you can continue operation. To return to normal speed, leave the printer idle for at least 30 minutes. The
speed does not return to normal if the power is off.

Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8

If you want to stop printing from your computer, make the following settings.
Run Web Config, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System
Preferences from the
then add the printer again.

Cannot Start Scanning

❏ If you are scanning with the ADF, check that the document cover and ADF cover are closed.
❏ Connect the USB cable securely to the printer and the computer. If you are using a USB hub, try to connect the
printer directly to the computer.
❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.
❏ Make sure that the correct printer (scanner) is selected on Epson Scan 2.
Check whether or not the printer is recognized when using Windows
In Windows, make sure the printer (scanner) is displayed in Scanner and Camera. The printer (scanner) should be
displayed as "EPSON XXXXX (printer name)". If the printer (scanner) is not displayed, uninstall and then re-
install Epson Scan 2. See the following to access Scanner and Camera.
❏ Windows 10
Click on the start button, and then select Windows System > Control Panel, enter "Scanner and Camera" in the
search charm, click View scanners and cameras, and then check if the printer is displayed.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and
216