Table of Contents
Advertisement
Installation
Caution: The programmable thermostat shall
be installed by qualifi ed personnel only, in
compliance with the current regulations in
force.
Programmable thermostat installation involves
the following operations:
• Fastening the base.
• Electric connections.
• Fitting the batteries.
• Fastening the programmable thermostats
onto the base.
• Confi guring programmable thermostat pa-
rameters.
Fastening the base
The programmable thermostat comes with a
base suitable for wall mounting or for fl ush-
mounting in three-module rectangular or round
boxes.
SPACING DIMENSIONS FOR FIXING THE BASE
Separate the base from the programmable
thermostat levering on the slot located at the
bottom of the base by means of a proper tool.
Make sure that the base is properly secured
and it is not deformed. Check that the
programmable thermostat multi-pole connector
is placed at the bottom left corner.
To ensure correct operation the base shall
be installed at about 1.5 metres above the
fl oor level and far from heat sources (heating
radiators, direct sunlight, etc.), doors and
windows.
18
83
60
60
Advertisement
Table of Contents
