Table of Contents
Advertisement
1
INSTALLATION
The CH193 chronothermostat must be installed in a 3-module recessed box, in the
middle of the apartment, preferably 1.5 m off the ground.
PERFORM THE FOLLOWING
OPERATIONS:
1
Act on the master switch on the electric
panel to cut power to the electrical system;
2
Connect the two wires of the boiler to
terminals 1-2 of chronothermostat;
3
Connect the two power cables L-N;
4
Screw the frame onto the box using the
provided screws, paying attention to the
indicated assembly direction;
5
Switch the electric system back on;
6
Insert the thermostat body in the frame
fixed to the wall.
Intellicomfort
CH193
3
Advertisement
Table of Contents
