SolidRF Signal Plus Manual page 14

Step6: Finalizing Outdoor Antenna Installation
Once you have tested the performance of the signal booster and made all necessary
adjustments, it's time to finalize the installation.
Outdoor Antenna Installation
Make sure that the outside unit is mounted at least 3 feet away from any windows.
Option A : Outside Roof Pole Mount
(Best Choice) Use an existing pole to
mount the outdoor unit in the optimal
signal location. Use the picture for
reference.
Seal and Fix the Connector
In particular, cables for outdoor antenna locations
must be fixed. Otherwise, the internal wires of the
cable will be pulled off after the wind has been
shaken for a long time. The amplifier will not receive
the signal and the system will fail completely.
As shown in the figure, it is best to have the cable
around a single turn shape and then fix it.
Long-term rain or moisture erosion
can damage the electrical
characteristics of outdoor antenna
connectors. Make sure connectors
are well screwed in and seal the
connectors with glued tape.
Option B : Mounting on the side of
the chimney(Second Choice).
Secure the cable to
prevent cable
damage caused by
wind shaking
14