Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SolidRF BP5
Summary of Contents for SolidRF BP5
- Page 1 Pro 5 Bands Signal Booster www.SolidRFCanada.com...
-
Page 2: User Manual
BuildingForce 4G PRO Cellular Signal Booster User Manual Connect the world Features • Greatly reduces dropped calls, extends signal range, and increases data rates • Allows multiple mobile devices to be used simultaneously • Oscillation (or interference) detection and automatic shutdown with auto reset •... - Page 3 Installation 2. Step by step installation Step 1: mount the outside antenna 1.How it work Choose right position Find the strongest signal position in the possible install • locations by read your cell phone signal bar; 30cm away from any other metallic objects; •...
- Page 4 Installation Set the outside antenna cable into the building Step 3: arrange the booster Carefully arrange the cable along the building outside Choose position • and make sure don’t fold it; Be sure away from heat source; • Fix the cable at each corner; In ventilate dry place, temperature range should •...
- Page 5 Installation Step 5: study GUI information “State” there are three statements for each link: red color for alarm, green color for normal and good condition, yello w for sleep mode; b. “Gain” is each bands’ current gain state in dB; “Pow”...
-
Page 6: Technical Specification
Make sure you have followed this installation SolidRF, any other products non-approved by recommended, and check every thing carefully. SolidRF or self-made power cable may damage the If you can’t fix the problem please contact the booster. technician or our distributor. -
Page 7: Warnings And Recommendations
Warning: It will damage the mobile device and the booster if connect them with a cable directly. Warning: Use the power supply provided by SolidRF only. Other power supplies may cause damage of the booster. Warning: Antenna installation is restricted to 10 meters or less height above ground, even if the antenna is installed inside when used with a mobile device that operates in the 1710-1755 MHz band. - Page 8 This is a CONSUMER device BEFURE USE ,you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent .Most wireless provider consent to the use of signal boosters .Some provider may not consent to the use of this device on their network .If you are unsure, contact your provider.
Need help?
Do you have a question about the BP5 and is the answer not in the manual?
Questions and answers