SolidRF Signal Plus Manual page 11

Antenna mutual position( top view)
Avoid cross antenna beams( the best
solution)
Do not face the outdoor antenna to the
indoor antenna
The indoor antenna is a panel
directional antenna. Choosing a
location faceing all over your home
will help to maximize your coverage
area.
Step4: Connect the System
1. Connect the outside antenna to the 30
feet RG6 cable, fix the connector(In order to
avoid internal damage of the antenna
connector due to gravity or pulling the cable)
Secure the cable near the antenna
to prevent cable damage caused
by wind shaking
Ensure the distance, allow the antenna to
cross the rear beam( good solution)
Do not face the indoor antenna to the
outdoor antenna
11