Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Stryker CrossFlow
Summary of Contents for Stryker CrossFlow
- Page 1 CrossFlow quick start guide Dynamic Medium Doctor 1 STOP...
-
Page 3: Table Of Contents
Table of contents CrossFlow quick start guide Pump interface reference Pump start up Setting navigation Pressure, suction and flow settings Wash function Cannula settings Shaver and RF console integration Footswitch and hand control settings Temperature monitoring settings Save surgeon profile settings... -
Page 5: Pump Interface Reference
Refer to the instructions for use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use. The IFU part number is: P17330 The CrossFlow Pump catalog number is: 0450-000-000... -
Page 6: Pump Start Up
Green checkmarks will indicate that the cassette(s) have been properly inserted. Once the Inflow Cassette is inserted, the The CrossFlow start up screen will appear and a progess bar pump will advance to the User Profile Selection Screen. - Page 7 Small joint press “Dynamic Mode”. =Prime pump = Advance to next screen = Return to joint selection screen and start new case = Return to previous screen The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000...
-
Page 8: Setting Navigation
Settings navigation How to access and adjust general settings for the CrossFlow pump. Step 1: Access settings menu Step 2: Adjust general settings Step 3: Change pressure display = Pump customization menu = Setup sub-menu = Actual pressure display settings screen Change how pressure displays on the run screen by pressing the desired icon. -
Page 9: Pressure, Suction And Flow Settings
NOTE: On the CrossFlow console, shaver, and RF tube. set pressure. pressure is adjusted in increments of 5mmHg NOTE: Suction will adjust in increments of 10% The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000... -
Page 10: Wash Function
Wash function How to access and adjust the wash function. Step 1: Access settings menu Step 2: Adjust wash settings Step 3: Start pump to perform wash = Wash settings sub-menu = Pump customization menu = Wash function active = Increase pressure/flow/duration settings = Wash function inactive = Decrease pressure/flow/duration settings = Exit settings menu... -
Page 11: Cannula Settings
Run Screen. Hardware-specific alternative tab As an alternative to Dynamic Mode cannula settings, the specific scope/cannula combination can be selected in the hardware-specific tab. The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000... -
Page 12: Shaver And Rf Console Integration
Shaver and RF console integration How to access and adjust approved resection console integration settings. Step 1: Access settings menu Step 3: Customize shaver Step 4: Customize RF NOTE: While in “Other”, suction must be checked = Shaver console settings = Pump customization menu if using RF devices with suction. -
Page 13: Footswitch And Hand Control Settings
The hand control and footswitch are now customized. NOTE: CrossFire 2 Hand Control and CrossFire 2 Footswitch can have only one button programmed with CrossFlow function. The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000... -
Page 14: Temperature Monitoring Settings
Temperature monitoring settings How to select temperature monitoring and mitigation settings for use with SERFAS probes. Step 1: Access settings menu Step 2: Customize temperature Step 3: Return to run screen monitoring Temperature indication is displayed = Pump customization menu = Temperature monitoring Return to run screen sub-menu... -
Page 15: Save Surgeon Profile Settings
The updated settings are now saved to the Custom = Save current settings to Surgeon Profile custom surgeon profile NOTE: The settings of the default dynamic profile cannot be saved over. The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000... - Page 16 Stryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: CrossFlow and Stryker. All other trademarks are trademarks of their respective owners or holders. The absence of a product, feature, or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo. 1000900963 Rev C...