Temperature Monitoring Settings - Stryker CrossFlow Quick Start Manual

9

Temperature monitoring settings

How to select temperature monitoring and mitigation settings for use with SERFAS probes.
Step 1: Access settings menu
= Pump customization menu
10
Refer to the instructions for use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use.
Step 2: Customize temperature
monitoring
= Temperature monitoring
sub-menu
Press:
= For temperature
Monitoring & Mitigation
monitoring, display and
mitigation actions
= For temperature
Monitoring Only
monitoring and display
with no mitigation
actions
= For no temperature
Off
monitoring, display or
mitigation actions
Step 3: Return to run screen
Temperature indication is displayed
Return to run screen
= Exit menu
NOTE: Temperature monitoring is only available
with CrossFire 2 using SERFAS suction RF probes.
The temperature settings are now customized.